|
|
Post by Matt~Attude on Jun 21, 2010 21:06:03 GMT
ok no probs thought it may go abit like that. think i might need to invest in a engine stand
|
|
|
|
Post by Matt~Attude on Jul 1, 2010 20:16:24 GMT
got some goodies awaiting fitment currently residing on my dinning table lol anyway heres some pics  vmaxscart cylinder head big valve double springs and mini spares centre main strap and mini spare roller tip rockers  mini spare straight cut drop gears  injection inlet manifold throttle body and filter for supercharger, trigger wheel and coil pack and ht leads hmm cant wait ;D matt |
|
|
|
Post by MiniGT5 on Jul 4, 2010 20:30:53 GMT
Looking good Matt
What spec head were you running previously?
N.
|
|
|
|
Post by MiniHaven on Jul 5, 2010 7:24:28 GMT
looks lovely on the table matt but it wont do anything there mate !!!! bet kelly loves it on the table too ?
|
|
|
|
Post by Matt~Attude on Jul 5, 2010 19:05:20 GMT
i was running a jon speed stage 3 however i fancied having a head and decompression plate made to run with my engine's cc at tdc mainly to be sure everything will run correct. the head i got going on is the vmax "road plus" 31 ex 35.7 in stainless steel valves with 3 angle seats fully polished and ported and unleaded. it will eventually make its way onto the car  |
|
|
|
Post by MiniGT5 on Jul 5, 2010 20:28:03 GMT
will be interesting to see what king of power that makes. still not got mine setup probly although the new distributor is fitted and it seems to have solved the carb icing although that could be the hotter weather  N |
|
|
|
Post by Stephen on Jul 12, 2010 18:53:15 GMT
|
|
|
|
Post by Matt~Attude on Jul 13, 2010 19:54:45 GMT
 lol
|
|
|
|
Post by Matt~Attude on Jul 14, 2010 19:26:54 GMT
photo update.    centre main strap fitted  straight cut input and idle gear fitted. ;D |
|
|
|
Post by minimalal on Jul 15, 2010 21:20:27 GMT
nice calipers! where did you get them from may i ask as im looking to go for 10" wheels ps i love this car  |
|
|
|
Post by Stephen on Jul 16, 2010 19:00:23 GMT
They're MiniSport calipers Looking good Matt |
|
|
|
Post by Matt~Attude on Jul 17, 2010 9:09:19 GMT
yes there the mini sport alloy 4 pot calipers with 7.9 vented and grooved disc which just squeeze in under my 10 inch revolution wheels
|
|
|
|
Post by Matt~Attude on Aug 4, 2010 20:40:33 GMT
engine and gearbox back together and a lick of paint to make it look pretty.   been spending more money this week kenlowe electronic fan kit from mini spares  80 amp alternator should be able to cope with the extra load of electronical gizmos  stainless steel injection lcb manifold  nice pretty fletcher exhaust   just cant wait to get it all together matt |
|
|
|
Post by Matt~Attude on Aug 7, 2010 20:49:55 GMT
engine now in ;D   |
|
|
|
Post by MiniGT5 on Aug 8, 2010 20:24:37 GMT
Is that a special pulley wheel WhenI put my standard one in there was only a few mm between the pully wheel and the radiator so you may have to move your rad out and make custom brackets... not a problem with no inner wings though. N |
|
lol
