|
|
Post by oldgit on Jul 22, 2007 20:25:29 GMT
Tool in question is £11.10 including vat from Minispares . Put the part number in the search box on the site to see it. Part no. is TOOL14 Is handy . OR 9-95 off ebay inc post  ;D ;D just got one |
|
|
|
Post by monkeyjim on Jul 22, 2007 21:51:26 GMT
Another Jim bargain ;D |
|
|
|
Post by MiniHaven on Jul 23, 2007 7:13:03 GMT
modified screwdriver works just fine here
|
|
|
|
Post by Simon1275mpi on Jul 23, 2007 12:46:53 GMT
Circlips, na! Worse jobs than that. Screw driver and a hammer works for me.
Looking good Rachel!
The lights are an easy one. Just park another mini next to yours facing a wall, then adjust your lights to match the example car. A tape measure is handy to set the light to the right position on the wall.
|
|
|
|
Post by Rachel on Jul 26, 2007 16:12:56 GMT
Fingers crossed the clutch is fixed  ;D ;D I replaced the slave cylinder with one Jim brought round last week to try..........hopefully this has solved the problem   ;D Thanks Jim, what do I owe you?  Top AND BOTTOM ball joints to be replaced tomorrow ;D |
|
|
|
Post by Rachel on Jul 30, 2007 16:48:33 GMT
Yippee ;D Finally got the ball joints done today and put everything back together again. ;D I must admit to a bit of cheating............taking the hub to the garage for the professionals to replace the ball joints.........£15 well spent ;D ;D ;D Ready for MOT re-test on Wednesday ;D New track rod end ;D  New ball joints ;D  |
|
|
|
Post by Simon1275mpi on Jul 30, 2007 19:20:40 GMT
Thats cheating, a work top vice would of done the job |
|
|
|
Post by Rachel on Jul 30, 2007 19:21:58 GMT
We tried that.............and failed  |
|
|
|
Post by Rachel on Jul 31, 2007 9:59:12 GMT
Tool in question is £11.10 including vat from Minispares . Put the part number in the search box on the site to see it. Part no. is TOOL14 Is handy . OR 9-95 off ebay inc post ;D ;D just got one Jim, your magic tool works a treat ;D ;D ;D ;D ;D Here it is in action.........bit blurred   Clip firmly in place ;D  |
|
|
|
Post by Rachel on Jul 31, 2007 11:35:43 GMT
Metal bar and mallet worked just fine this morning.........and cheaper too ;D I think I will take all that back Jim's tool is sooooo much better ;D ;D ;D |
|
|
|
Post by oldgit on Jul 31, 2007 19:56:07 GMT
Metal bar and mallet worked just fine this morning.........and cheaper too ;D I think I will take all that back Jim's tool is sooooo much better ;D ;D ;D Thats what Shirley tells me ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D Sorry Tony  |
|
|
|
Post by Rachel on Aug 1, 2007 9:17:19 GMT
Yippee!!!! ;D Bogey finally passed his MOT this morning Thanks to everyone who helped me to get the work done |
|
|
|
Post by oldgit on Aug 1, 2007 9:30:28 GMT
|
|
|
|
Post by Rachel on Aug 1, 2007 9:32:44 GMT
Thanks Jim ;D
Feeling very pleased with myself.......big silly grin ;D ;D ;D ;D
|
|
|
|
Post by Simon1275mpi on Aug 1, 2007 10:50:34 GMT
Yippee!!!! ;D Bogey finally passed his MOT this morning Thanks to everyone who helped me to get the work done Congratulations!!!  Turbo next? ;D |
|
;D ;D
;D
Turbo next? ;D