lots of parts, money need for trailer

[Miniböttcher]

hi everyone

just a little story

i brought a back end of a mini from a bloke in newheaven to make into a trailer. it came with loads of spares which i am selling to fund the trailer project.
so if anyone needs anything please don't be scared to shout.

right hear is the list.

FIRST COME FIRST SERVE
rod gear linkage with a QUICKSHIFT and cromie gear knob £20
standard gear linkage £5
rear glass mark4 £5
pair of fixed rear glass and rubbers £15
Drivers glass £5
Drivers door and passanger door
both bare doors best to have the snd blaster, good solid doors
£25 each or both for £45
Mark 1 bonnet will built in louvers vents, nice bit of craftmanship, no cut outs all made out of the bonnet its self. £30
1 door pocket dark blue £2
2 coils
2 998 cast mainfold
rev, fuel and temp £15
2 pod speedo cover black.£5
set of door bot handles in black with keys £10
later fuse box.£2
rad hose( bottom of rad to water pump) think its for a injection mini because it has a heater valve on it. £5
standard passanger arch black £2
window winder mechanisium £5
spacer drum with drive flange £5
washer bottle £2
alterator £5
1275 cast mainfold metro £5
tall brake master cylinder £5
2 brake or clutch master cylinder£ 5 each
horn £3
rockers £5
2 front upper arms £ 5 each
mini radio
lcb mainfold no Y peice £10
2 bare radius arms good condition £15 for both
3 light bowls 2 metal 1 pastic, £3 each
sun vizser
2 rear view mirrors £5 each
2 hand brake handles £3
1 seat belt £5
plastic side mirror £3
set of boot hinges £5
odd interial door funitire £?
right side grill surround£2
back plate for drum brake £3
bonnet latch £3
8.4 brake caliper £5
boot lid light £5
rear drive flange £3
dash vent of wind screen£1
servo take off pipe £3
2 door strickers £5
exclerator pedal £3
front hub £5
4 rear trumpets £3 each
2 front trumpets £3 each
2 rocker covers £3
rad bracket off gearbox £3

pictures on request.
contact me on hear or pm.
or call me on 07786 264170 after 3.30 on weekdays
or email on [e-mail]

thanks dean

[Matt~Attude]

hi dean is the servo take off pipe the pipe that has a one way valve and goes between the servo and inlet manifold?
if so i need one
matt

[Miniböttcher]

its just the metal pipe with a rubber pipe the goes to the servo but there is no one way valve. it should work with out one mine has not got one.

[Miniböttcher]

i am going to the club meeting tonight so if there is anything you need i can bring it.

so give me a call before 7.30 and i can bring it as i will not be able to be at a computer.after now !!!!!

[Miniböttcher]

still got all the bits
and more

open to offers on all spares

or swap

thanks dean

[gary26]

HI DEAN,

What sort of condition are the doors in, i am after both for my project,

gary

[Miniböttcher]

the doors are ok they have been striped down to bare metal by the last owner then left. the skins are good they just need sand blasting to get rid of the surface rust

thanks

dean

[MiniGT5]

Dean can you post a pic of the bonnet


Cheers Neil :-)

[Miniböttcher]

i will get a photo tonight.

i do not know how to post photos on the site.

i will send it to your email , then can you post it for me

thanks

dean