|
|
Post by gary26 on Aug 14, 2007 18:18:17 GMT
I have just re-fitted the bootlid to the clubman after its re-spray, the problem is it is sitting to far over on one side, i have fitted new hinges and have allready checked to make sure they are not the wrong way round. The gap on one side is about 1mm and the other is about 2cm's. It wasnt like this before
ANY IDEAS???
|
|
|
|
Post by Simon1275mpi on Aug 14, 2007 18:23:06 GMT
There should be plenty of play in the hingle mounts holes on the car to move it over. Else get a file out and make it.  Remember to re-paint the bare metal |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 14, 2007 18:51:35 GMT
had to do this with dukes bootlid too
though i used a drill to oval the holes more
gaffa tape helped protect everything while you line up
|
|
|
|
Post by MiniHaven on Aug 14, 2007 20:19:16 GMT
yeah also double check that you have not been sold two of the same hand as they are handed .hope this helps
shawn
|
|
