hen
Mini 40
Ta-daaaah!!!
Posts: 41
|
Post by hen on May 28, 2007 10:29:20 GMT
ok just my mini running sweet after nrly 4 years for being off the road but when i took the beast for a sneaky test run I was having to pump the clutch a few times before it would go into gear!
any ideas? I adjusted the clutch arm and it made no difference... maybe new slave cylender in order???
want to make sure i have tried everything before I go spending more money on it!
|
|
|
|
Post by Stephen on May 28, 2007 12:36:36 GMT
how is the fluid level? if it is low this will cuase the problem. howvere there has to be a reason why it is low so it could be master cylinder or slave cylinder or often- both.
|
|
|
|
Post by Stephen on May 28, 2007 12:37:12 GMT
or pipes/connections. If you change the hose use a braided one
|
|
hen
Mini 40
Ta-daaaah!!!
Posts: 41
|
Post by hen on May 28, 2007 16:12:41 GMT
yeah checked the level and its full right up and it had a new banjo hose on it when the engine was running befor and i never had any trouble with it... hmmmmmm  |
|
|
|
Post by Stephen on May 28, 2007 16:13:46 GMT
slave cylinder or master cylinder, have you tried bleeding it to get rid of air? how old is the fluid?
|
|
|
|
Post by MiniGT5 on Jun 2, 2007 19:20:24 GMT
put a clamp on the hose and if you get a peddle then you know its the slave cyl if after clamping the hose you cont get a hard peddle the you know its the master cyl N  |
|
