Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 24, 2007 22:45:18 GMT
when you fit a center back box exhaust what do you have to do to get it to fit
|
|
|
|
Post by AntMan on Apr 24, 2007 23:36:28 GMT
lol what you mean to get it fit!?! Ant  |
|
|
|
Post by MiniGT5 on Apr 25, 2007 6:00:53 GMT
depends if your fitting just a back box or a complete system if just a back box then cut the old exhaust anc bolt up to that alternativly botl up to the new centre section. The only bit that is different is that you have to drill two holes to bolt the exhaust rubber mounts to the rear subframe crossmember. Hope that helps N |
|
|
|
Post by Bean Machine!!! on Apr 25, 2007 15:21:26 GMT
u get your back baox thing apply several coats of PVA to rear vabulance stig on end of down pipy and whatch it all go bang when u star up
|
|
|
|
Post by Stephen on Apr 25, 2007 16:13:51 GMT
cable ties should work
|
|
|
|
Post by MiniGT5 on Apr 25, 2007 16:56:22 GMT
no cable ties required just 2 self tapping screws if you really want to do it on the cheep N |
|
|
|
Post by monkeyjim on Apr 25, 2007 19:03:39 GMT
no, your all wrong .
Give Minispares a call for a set of centre exhaust air straps .
|
|
|
|
Post by Miniböttcher on Apr 25, 2007 20:37:16 GMT
dont forget to knock it in to place with a glass hammer.
|
|
|
|
Post by Simon1275mpi on Apr 26, 2007 16:33:58 GMT
dont forget to knock it in to place with a glass hammer. No No No, you want sky hooks! Gýve ýt a coat of raýnbow paint and go get a long wait. |
|
