|
|
Post by roblee on Mar 20, 2007 9:41:06 GMT
when alan looked at my engine the other day  he said about replacing my engine mountings. should i wait until sundays brooklands show and see if i can pick up a set there or just buy them of minispares? |
|
|
|
Post by oldgit on Mar 20, 2007 9:44:21 GMT
If its the engine steady bushs pick um up at brooklands and save on postage  |
|
noisymini
Mini British Open Classic
Posts: 98
|
Post by noisymini on Mar 20, 2007 12:31:29 GMT
Yeah wait till show. I always try to pick stuff up at shows rather than order it cos you know exactly what you're paying for when you can get your mits on it |
|
|
|
Post by Stephen on Mar 21, 2007 11:35:24 GMT
 while you're at it, try fitting some of these beauts along with polyeurythene mounts over the rubber type to make the engine more solid....stops you breaking exhaust manifolds especially if you hav an LCB whcih tend to leak badly |
|
|
|
Post by roblee on Apr 21, 2007 17:48:14 GMT
what are those parts called stephen. im thinking of investing in a pair now that i wrecked my LCB manifold
|
|
|
|
Post by Stephen on Apr 22, 2007 18:54:12 GMT
gearbox steadies I think, hav a look in the minispares / minisport/ minispeed catalogues they all sell them
|
|
|
|
Post by roblee on Apr 23, 2007 15:51:30 GMT
do i need to get both sides?
|
|
|
|
Post by roblee on Apr 23, 2007 15:51:48 GMT
are they easy to fit?
|
|
|
|
Post by Stephen on Apr 24, 2007 16:12:15 GMT
yes
and ... not too bad, there should be a couple of holes pre-drilled in the subframe for these mounts, or at least there were a couple on mine. Had to drill a hole though
|
|
he said about replacing my engine mountings. should i wait until sundays brooklands show and see if i can pick up a set there or just buy them of minispares?
