stopping power

[Deleted]

i have some 4 pot metro brake hubs and calipers with vented disc's will they fit on to my Mayfair or do i need some different brake hoses? any info would be help full. also i have a mini servo would bit be a better to fit that as well?

[Miniböttcher]

right i made myself a set for my car and rebuild a set and sold them

1 dont use the metro hubs , other wise you will need adjustable camber and tie rods to set it up
use the standard mini hubs it much easier.
2 other than that use all the metro 4pot drive flange and the bolts , caliper, discs.
its good you have the vented one, much better, but it does push your wheels out a little bit more.
most mini specails do a bradied hose convertion kits that makes it 2 hoses into 1
in mini spares www.minispares.com/Product.aspx?pid=35514

use a servo they dont work well with out one and you can get braided hose for that too, but only for the servo on mark 4 car on wards were thet are bolted to the baulk head, then if you have to move the servo you dont have to drain the system, with copper hoses you would have to because they would brake when bent a few times
mini spares www.minispares.com/Product.aspx?pid=37822

other than that it just like fitting standard mini brake but with much better power

if there is anything else you want to know please ask

dean