Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 17, 2010 21:42:47 GMT
;D After been set upon by a couple of well know members and my partner Leann  i had my arm twisted into buying leann a mini that she wants to pink up, only 1 photo at the moment, more to follow  This is gonna be a complete rebuild  my first one so could be interesting Jobs noted so far that need doing are as follows take a deep breath hehe boot floor rear subframe most likley subframe mounting panel rear valance both a panels engine and gearbox rebuild or new engine left rear panel bonnet 1 wing maybe both. will start by stripping right down to see what salvageble and then maybe cry hehe will post more pics when i got them Daz |
|
|
|
Post by katentel on Apr 19, 2010 20:09:42 GMT
hey daz hope this doesnt go the same way as roger!!!! NEGLECTED!!!!!!!!!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 20, 2010 12:15:07 GMT
;DRoger will be making his way to his new home very shortly, garage is clear and ready for the city e, which will arrive on thursday, then fingers crossed roger will be brought over in a couple of weeks ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 22, 2010 19:15:41 GMT
;D The City E is now home and in garage awaiting my company, will take some pics at weekend.
Big thanks to Gareth for his time and transporter
daz
|
|
|
|
Post by MiniGT5 on Apr 23, 2010 16:34:41 GMT
I have voted Betty Boo seems the perfect name for a pink '82 Why is everyone voteing for kitty  N. |
|
|
|
Post by delly on Apr 23, 2010 23:35:31 GMT
because ria,s car is called betty boo ;D ;D ;D ;D ;D ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 24, 2010 11:12:33 GMT
|
|
|
|
Post by MiniGT5 on Apr 24, 2010 14:45:57 GMT
Opps dident realise about the name thing.
Nice set of wheels you got there daz will look fab polished up... what you gunna do about the rest of the body work? Looks like a major project there
N.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 24, 2010 16:20:16 GMT
Gonna rebuild it got front panel, a panels, scuttle if needed, rear valance so far, will know more when it's complety stripped, hoping to rebuild rather than re shell we will see.
Daz
|
|
|
|
Post by MiniGT5 on Apr 24, 2010 16:44:30 GMT
Rather you than me matey! your very brave tackeling that lot.
N.
|
|
|
|
Post by Stephen on Apr 24, 2010 18:33:15 GMT
Looks like a reshell project to me...
Good luck though!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 25, 2010 12:06:04 GMT
;DBeen Busy this morning, some more pics The front end minus some bits, need to drill out indicators and head lamp bowls  Inside front more or less stripped out  Drivers footwell new one for here me thinks  foot well again  drivers side bulkhead  passenger side  drivers side  drivers side again  passenger side not as bad as drivers side  passenger side parcel shelf  sprinkling of the brown stuff  maybe a new front subframe needed  if you look hard enough you can see right inside hehe  everything chucked in back  I think a lot of the stuff taken off will be thrown away and new items brought prob be the best way, as storage is limited, and can get new stuff as and when it is ready to put back on daz |
|
|
|
Post by Miniböttcher on Apr 25, 2010 12:50:07 GMT
OH MY GOD DAZ
if!!!! IF you do decide to re weld it up i will shake you hand and give you a very big pat on the back,
i can weld but i would not go anywhere near that. so hats off to you
the car last week i cut up was in better condition than that and it was only £51,
ps i still have a complete bulk head section from that car i cut up.
GOOD LUCK
|
|
|
|
Post by katentel on Apr 25, 2010 16:02:23 GMT
your a brave man daz, realistically you have a hell of a lot of work there, and you havent even started to cut back yet!! come on leann, what you going to be doing with it
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 25, 2010 16:31:09 GMT
Done some More this afternoon, made some more holes and my pile of brown Rust got bigger hehe, also engine more or less ready to come out, just got to jack it up release bottom steady, subframe mounts, disconect clutch slave cylinder, and pop drive shafts, then lifting will be ready.
Not too much left to strip, rear bumper, lights, arches, rear windows and rear carpet, ph and rest of components in engine bay lol
Daz
|
|
i had my arm twisted into buying leann a mini that she wants to pink up, only 1 photo at the moment, more to follow
my first one so could be interesting
, but at the same time a little nervous 
as never taken on such a big project, but hey got to start somewhere lol ;D, right here the first of many pictures to come ;D
