Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 5, 2010 20:51:09 GMT
Ok here goes, this is a long shot...I had to remove the switch for my lights, now I can't get the bugger back in, short of extending the cable, does anyone have any tricks they know of to help a frustrated lady owner lol. P.s I have tried perseverance.  Attachments:
|
|
|
|
Post by Miniböttcher on Apr 5, 2010 20:59:51 GMT
un screw and drop down the heater, there are 2 screws under the switch panel one each end,then you can get the the switch and cable from behind the dash
push you switch it to place then put your hand under the dash and push the connect back on the switch,
push heater back up and screw it in job done, 5 minutes max
|
|
|
|
Post by Stephen on Apr 5, 2010 21:01:28 GMT
It would might help to undo the heater screws and drop it down so you can get in there. The cables should be long enough so might be caught somewhere?
|
|
|
|
Post by Stephen on Apr 5, 2010 21:02:33 GMT
^ took me over two minutes to type that obviously!
|
|
