|
|
Post by katentel on Feb 28, 2010 21:41:55 GMT
does anyone have a metro 1275 with a ignition module that has 3 wires comming out of it on the distributor? if so can you tell me what wires go where? looked iat metro diagram and it says + - and earth but doesnt tell yuo which one goes where thanks
|
|
|
|
Post by mk1morris on Feb 28, 2010 22:17:36 GMT
just had a look at mine it would seem the there are only to wires coming out of the 3 pin plug one to positive one to negative and the center pin not in use im shure i have a spare mg cable/ plug for this ill have a look tomorow and let you no
|
|
|
|
Post by mk1morris on Feb 28, 2010 22:33:32 GMT
on mine with the vacume part of the distributor facing up number 3 would be closest to the rad and goes to positive on the coil and number 1 closest to the washer bottle goes negative i can only asume the center pin is earth but must do so inturaly as i dont have a third wire i hope this make some sence to you
|
|
