|
|
Post by bigtony on Nov 1, 2009 13:07:23 GMT
hi i got my self a set of twin su carbs got them all to gether now but if anyone could help mewith advice or help put them it would be really good as got no clue how to ballance them or tune them thx a turner
|
|
|
|
Post by Miniböttcher on Nov 1, 2009 14:54:10 GMT
what condition are they in?  if they are worn you will never get them set up right, you can buy rebuild kits at about £60, but also check the spindle play, if there is too much you will have to get them rebushed. what size twin carbs are they and were did you get the from and what car were they on? fitting them can be a bit fiddley but you will have to get them set up and balanced with gerald as its not something you can really do at home without the proper tools gerald will proberly fit them for you if you ask, and maybe rebuild them but thats something your have to ask gerald. |
|
|
|
Post by bigtony on Nov 1, 2009 21:16:19 GMT
thay in ok condition thay are 1 1/4 and i want to fit my self im doing all the tuneing my self only way i going to learn got car going really well now so just want some one who has one to watch ofer really im going o giv it aa go tomorow
thx a turner
|
|
|
|
Post by MiniGT5 on Nov 2, 2009 15:07:13 GMT
1 1/4 are only really any good for a tuned 998. I thought you had a 1275 N  |
|
|
|
Post by paul30 AKA Badger on Nov 2, 2009 15:49:12 GMT
|
|
|
|
Post by MiniGT5 on Nov 2, 2009 15:54:24 GMT
What state of tune is your 1275 in I have a good set of twin 1 1/4's that I wanted to fit to my 1275 but was told not to bother with then on a 1275 just go with a single 1 3/4. I thought you really needed twin 1 1/2s Would the 1 1/4's be any good on that engine in my pickup? N |
|
|
|
Post by paul30 AKA Badger on Nov 2, 2009 17:02:31 GMT
i can't see why not as long as you tune them or get them tuned.
|
|
|
|
Post by bigtony on Nov 2, 2009 17:28:55 GMT
its not a standed 998 it ggose really well 4 a 998 at the end the day going to put them on c how it runs if i dont like it can allways change back it just geting time to do what i want lol
(thats not a dig to any one its just i ill help anyone befor doing what i got to do )
a turner
|
|
|
|
Post by Miniböttcher on Nov 2, 2009 18:42:27 GMT
twin 1. 1/4 will work fine up to mild tune 1275, but you get the most out of a 1275 get single 1.3/4 hiff
for higher tuned 1275 twin 1. 1/2 or single 1. 3/4
but as tony only has a 998 with a 1275 head the twin carbs will work fine. but like i said make sure they atre not worn
|
|
if they are worn you will never get them set up right, you can buy rebuild kits at about £60, but also check the spindle play, if there is too much you will have to get them rebushed.
