Lowered steering wheel

[Rachel]

Hi

My advantage has the bracket fitted to the steering column to lower the steering wheel.

I want to remove it, but is it just a matter of removing the bracket and re-bolting the steering column in place or is it more involved?

Thanks

Rachel ;D

[Miniböttcher]

2 opitions.

undo the clamp and lift it back to the original place and retighten

or find the old clamp undo the 2 bolts on the lower dash rail, undo the clamp around the column and off it comes.old one in reverse

also release the bolt at the bottom of the steering column by the pedals while you move it up and down, then remember to tighten when you have finished, very important you remember this other wise you will not have any steering

its not hard, you took the clutch on and off , on and off and on and off, so you will be able to do this

[paul1275s]

Just to add to Dean's post above, it is the four nuts that secure the U bolts for the steering rack (two in each footwell) that you need to slacken to allow the input for the rack to match the new angle of the steering column. Not doing this can lead to steering failure.

[Rachel]

Thanks guys ;D

I will have a look during the week but I might need some supervision

Will let you know how I get on ;D

[paul1275s]

i'm free Monday, wednesday and thursday this week if you need a hand.

[Rachel]

Thanks Paul ;D

I don't have many plans for next week so if you do find you have half an hour to spare your help would be gratefully accepted ;D

Just give me a ring beforehand to make sure I am in ;D