|
|
Post by aliceinwonderland on Jun 18, 2009 19:02:57 GMT
Yes me with another question!! ;D New one thats happned today. When i go into gear....mainly first and second, (3rd is touch and go.) Theres a mega *crunch* noise as if ive forced it into gear or gone into the gear too early etc.... (im hoping you know that noise!!!) Reverse was doing it here and there for a while now but i thought nothing of it. I really have to force it to get into first when ive stopped.... i am putting my foot down to the floor with the clutch.  |
|
|
|
Post by Rachel on Jun 18, 2009 19:06:17 GMT
That's what happened to Bogey Had to have a new clutch fitted  |
|
|
|
Post by aliceinwonderland on Jun 18, 2009 19:16:12 GMT
oh no that doesnt sound very good  |
|
|
|
Post by oldgit on Jun 19, 2009 20:09:15 GMT
Yes me with another question!! ;D New one thats happned today. When i go into gear....mainly first and second, (3rd is touch and go.) Theres a mega *crunch* noise as if ive forced it into gear or gone into the gear too early etc.... (im hoping you know that noise!!!) Reverse was doing it here and there for a while now but i thought nothing of it. I really have to force it to get into first when ive stopped.... i am putting my foot down to the floor with the clutch. Try bleeding the clutch and checkingslave cylinder first, a lot cheeper and easyer than fitting a new clutch. |
|
|
|
Post by aliceinwonderland on Jun 19, 2009 22:42:53 GMT
erm im a little bit of a novice.....ok a fair bit of a novice!!! How do i do that and can i do it easily?! i dont think i can get it into a garage till monday |
|
|
|
Post by katentel on Jun 20, 2009 11:15:56 GMT
one man {or woman}bleed kits are readily available at any car shop, easy to use if you know where your slave cylinder is. dont forget you will need some clutch fluid before you start
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 20, 2009 15:42:14 GMT
;)Our good friend Mr Haynes will guide you through the process, you can get him on ebay, halfords, etc.
Just got one for my mondeo £4 on ebay.
Daz ;D
|
|
|
|
Post by aliceinwonderland on Jun 20, 2009 15:49:49 GMT
ahhh im way ahead of you daz i have two manuals!!  keeno me!! Lol even highlighted what i need to know!! oh yea! Im booking her into the garage as im not too confident with this one, think i could poss mess this up!!! lol. All the helps be handy tho i have been tempted to try it maybe tomorow after the car wash. |
|
|
|
Post by aliceinwonderland on Jun 23, 2009 13:46:15 GMT
Found out the problem, the slave cylinder has been leaking, so im replacing that now just waiting for the part to come and the master cylinder has partically ''seized'' or something along those lines but should be ok for now....i hope.
Now all i need to do is sort my brakes out and tidy up the engine etc!! woo
|
|
|
|
Post by oldgit on Jun 23, 2009 19:32:59 GMT
|
|
|
|
Post by queenofhearts on Jun 23, 2009 19:52:56 GMT
now now oldgit, of course he knows that. he can strip and rebuild a gearbox blindfolded!!!!
|
|
keeno me!! Lol even highlighted what i need to know!! oh yea!