Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 6, 2008 13:58:10 GMT
Ive sourced a wiper motor assembly and tried to get the multiplug off it, however in doing so the switch assembly (I presume for parking) completly disintergrated. Ive got the 3 wires for the motor (Im presuming 2 live speeds and a neutral) and 4 cables coming from the loom (im presuming 2 speeds live, 1 intermittant feed and 1 neutral. I dont suppose anyone knows which cable to connect to which?
|
|
|
|
Post by Miniböttcher on May 6, 2008 20:52:37 GMT
haynes manual, look at the wiring diagrammes at the back, its hard to say which is which, as they were different for different minis in differnt years
|
|
|
|
Post by MiniHaven on May 17, 2008 18:58:49 GMT
hi darrel
1)you have got a permanent live supplied by second ignition position
2) two supplies from wiper switch fast and slow
3) ground
thats it theres no intermittent , the permanant live from ignition position 2 feeds just the park switch ok?
|
|
|
|
Post by Stephen on May 17, 2008 20:33:09 GMT
shawn whats happened to ur name>?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 19, 2008 10:11:40 GMT
Hi ive just seen this. Thank you very much for the info  |
|
|
|
Post by MiniHaven on May 19, 2008 14:53:23 GMT
no problem pleased to be able to help .
|
|
