|
|
Post by simonblick on Apr 17, 2008 12:06:33 GMT
Hi all, the pin that connects the clutch pedal to the slave cylinder etc broke a few months back but managed to fix it by using a bolt and nut. However recently i have been getting a clicking noise when using the clutch and its coming from the same area. now the question is! What is that pin called as i would like to order a proper one before heading off to IMM. Or if anyone has a spare one then could buy/borrow etc one.
Regards
SiB
|
|
|
|
Post by Simon1275mpi on Apr 18, 2008 8:16:23 GMT
|
|
|
|
Post by simonblick on Apr 18, 2008 8:27:46 GMT
Im not sure which one it is!  Get one of each and a split pin for the hole! Will pop over to you before IMM so i can get it done! Cheers SiB |
|
|
|
Post by Simon1275mpi on Apr 18, 2008 9:23:54 GMT
Josie, could you have a look at your SPI peddle box, to see which pin is required for the peddle arm to the clutch cylinder.
The same pin you removed on Rachels car ;D
|
|
|
|
Post by Rachel on Apr 18, 2008 9:29:44 GMT
I think Si you will find it's the 2nd one that was fitted to Bogey  I think you can see it fairly clearly in the above pic ;D |
|
|
|
Post by Stephen on Apr 18, 2008 9:46:27 GMT
probably one of the most awkward jobs there is
|
|
|
|
Post by simonblick on Apr 18, 2008 10:03:09 GMT
Shouldnt be too bad if i take the seat out! It does look like the metal one.
Cheers all
SiB
|
|
Get one of each and a split pin for the hole! Will pop over to you before IMM so i can get it done!
