|
|
Post by Stephen on Dec 13, 2011 10:34:23 GMT
|
|
|
|
Post by MiniGT5 on Dec 13, 2011 11:56:07 GMT
What would cause that to happen  Pore installation or movement in use |
|
|
|
Post by Stephen on Dec 13, 2011 12:28:46 GMT
Not lining up the hi-lo properly before unwinding the compressor I guess. Or winding the hi-lo all the way down but not fitting short dampers, it could get dislodged when jacked up.
|
|
Pore installation or movement in use