|
|
Post by Miniböttcher on Apr 6, 2006 10:36:23 GMT
thank you very much. everyone read this link above it should put everyone straight. lol
thanks again dean
|
|
|
|
Post by Simon1275mpi on Apr 6, 2006 12:12:21 GMT
I'm using a 2.7, works fine for me and I'm on 60ish BHP,
Mind you up to 40mph Stephen in his 1000cc? on a 3.44diff kept up, the the longer legs of the 2.7 really showed.
|
|
|
|
Post by monkeyjim on Apr 6, 2006 20:31:00 GMT
no calming down or boxing rings required, sort yourselves out . ;D
Remember Dean and I are talking about a 3.4 diff and ten inch wheels .
If any of you running bigger wheels and lower diffs want to drive my car at 60mph plus to see what its like , be my guest . My 998 is from a Metro . You could say it is a disadvantage using a Metro engine for a Mini as the mk2 Metro used 13 inch wheels which makes the gearing even with the 3.4 diff a lot taller .
Dave
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 6, 2006 20:37:25 GMT
really, when can i take it for a spin then hehe
daz
|
|
|
|
Post by monkeyjim on Apr 6, 2006 20:57:20 GMT
Thought you would ask.  . At a club meet . Thought between the roundabouts on the Polegate bypass would be good. Was hoping one of the guys with low diffs and big wheels would like to compare it . Simon? Dave |
|
|
|
Post by Simon1275mpi on Apr 7, 2006 7:21:02 GMT
Car swap ;D Yeah would be good to get out our diffs in comparison.  |
|
|
|
Post by monkeyjim on Apr 7, 2006 18:25:47 GMT
ok
|
|
|
|
Post by Stephen on Apr 11, 2006 12:00:20 GMT
Mind you up to 40mph Stephen in his 1000cc? on a 3.44diff kept up, the the longer legs of the 2.7 really showed. Its not the diff. its the driver. ;D |
|
|
|
Post by Simon1275mpi on Apr 12, 2006 12:53:28 GMT
I guessing your a slow driver then? ;D Cant help remember leaving you so far behind I even had time for a tyre change before you caught up ;D ;D ;D
|
|
|
|
Post by Stephen on Apr 12, 2006 22:07:31 GMT
No way cos i is like a rude boy meaning i am da best like and u is rubbish and u avent even got a proper burberry hat. ;D
|
|
|
|
Post by Simon1275mpi on Apr 13, 2006 7:37:53 GMT
I cud we cuz have it out atz da auto bash da big pansie, init. |
|
|
|
Post by Stephen on Apr 14, 2006 20:15:02 GMT
wateva.
|
|
|
|
Post by monkeyjim on Apr 18, 2006 21:48:01 GMT
Glad to see a couple of members have been on the ml forum . Dean got a answer to his diff ratio question and tim dr had the fact a straight cut box needs a bit more go to make it work properly (ie. engine and box working together nearer there full potential) confirmed although I would like to point out that no-one on our forum posted that a engine under 100hp with a straight cut box is working to hard . Although a correct quote from a edmc post was found in the end..
Dave
|
|
|
|
Post by annon on Apr 19, 2006 15:21:40 GMT
what i like to see a d**n good debate everyonewith there own ideas, hope the weather holds for you sundy.
|
|
. At a club meet . Thought between the roundabouts on the Polegate bypass would be good. 
