H reg Project

[monkeyjim]

Here are a few pictures .
In these there is the modified gearchange ,


brake master cylinder base plate modified to take the clutch cable ,

re-inforced dash bars and uprated lowered steering column bracket,

ecu mounted
Wiring tube in front seat crossmember,
and the rad in its final position .

Currently the engine is back out again as per this last pic so I can finalise the welding of the rear engine mount bracket onto the subframe , build up the top suspension arms and correctly line up the alternator and water pump belts and there guide rollers..

[delly]

very nice work dave

have you used the whole micra loom

and have you left the wipers on mini controls

[monkeyjim]

Yes , i am using the entire Micra loom . No Mini wiring loom .
All switchgear is Micra as is the instruments.. The indicator and wiper stalks are also Micra . The Mini steering column is thinner than the Micra one which means I have had to weld a couuple of bits onto the column to make it wide enough so the Micra switch gear is secured . I am obvioysly using the Micra steering Column shroud. I am using the Mini wiper motor so I will need to modify that part of wiring to it .

[MiniGT5]

cool so how long before this will be back on the road?

N.

[monkeyjim]

I dont know Neil . I wont have a garage from June so I cant say.

[Stephen]

Good to see some pics

[paul1275s]

Nice work there Dave, a good little conversion..